Tag Archives: high torque gearbox motor

China Professional High Torque Helical Gear 400W Motor Planetary Gearbox advantages of planetary gearbox

Product Description

High Torque Helical Gear 400W Motor Planetary Gearbox

The main transmission structure of planetary reducer is planetary gear, sun gear, internal gear ring and planetary carrier. Planetary gear reducer has the advantages of small volume, high transmission efficiency, wide deceleration range and high precision. It is widely used in the transmission system of servo motor, stepping motor, DC motor and other motors. Its function is to reduce speed, increase torque, reduce load and motor moment of inertia ratio on the premise of ensuring precision transmission.

Product Description

1.With bevel gear reversing mechanism,right angle steering output is realized’
2.Circycle output,threaded connection,standard size;
3.The input specifications are completes and there are many choices;
4.Spur transmission,single cantilever structure,design simple,high cost performance;
5.Keyway can be opened in the force shaft;
6.stable operation and low noise;
7.Size range:60-120mm;
8.Ratio range:3-100;
9.Precision range:8-16arcmin;
10.Support custom according to drawings or samples

Product Parameters

Specifications				PVLN60	PVLN90	PVLN120
Technal Parameters				PVLN60	PVLN90	PVLN120
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	450	1240
Max. Axial Load			N	220	430	1000
Torsional Rigidity			Nm/arcmin	1.8	4.85	11
Max.Input Speed			rpm	8000	6000	6000
Rated Input Speed			rpm	4000	3500	3500
Noise			dB	≤58	≤60	≤65
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥92%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.46	1.73	12.78
		4	Kg*cm2	0.46	1.73	12.78
		5	Kg*cm2	0.46	1.73	12.78
		7	Kg*cm2	0.41	1.42	11.38
		10	Kg*cm2	0.41	1.42	11.38
	L2	12	Kg*cm2	0.44	1.49	12.18
		15	Kg*cm2	0.44	1.49	12.18
		16	Kg*cm2	0.72	1.49	12.18
		20	Kg*cm2	0.44	1.49	12.18
		25	Kg*cm2	0.44	1.49	12.18
		28	Kg*cm2	0.44	1.49	12.18
		30	Kg*cm2	0.44	1.49	12.18
		35	Kg*cm2	0.44	1.49	12.18
		40	Kg*cm2	0.44	1.49	12.18
		50	Kg*cm2	0.34	1.25	11.48
		70	Kg*cm2	0.34	1.25	11.48
		100	Kg*cm2	0.34	1.25	11.48
Technical Parameter	Level	Ratio		PVLN60	PVLN90	PVLN120
Rated Torque	L1	3	Nm	27	96	161
		4	Nm	40	122	210
		5	Nm	40	122	210
		7	Nm	34	95	170
		10	Nm	16	56	86
	L2	12	Nm	27	96	161
		15	Nm	27	96	161
		16	Nm	40	122	210
		20	Nm	40	122	210
		25	Nm	40	122	210
		28	Nm	40	122	210
		30	Nm	27	96	161
		35	Nm	40	122	210
		40	Nm	40	122	210
		50	Nm	40	122	210
		70	Nm	34	95	170
		100	Nm	16	56	86
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	1.7	4.4	12
Weight	L2		kg	1.9	5	14

Company Profile

Packaging & Shipping

1. Lead time: 10-15 days as usual, 30 days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Machine Tool
Speed:	High Speed
Function:	Driving
Casing Protection:	Protection Type
Certification:	ISO9001
Brand:	Newgear

Samples:	US$ 413/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

planetarygearbox

What is a Planetary Gearbox?

A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

planetary gearboxes

If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
Planetary gearboxes use three different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the two gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
There are three main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than one output shaft, allowing the user to choose the configuration and torque that is best for their application.
One of the main differences between a planetary gearbox and a conventional one is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install one with ease.
A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.

planetary gearboxes with output shaft

The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are two or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
A planetary gearbox can have three components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These three components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
planetarygearbox

planetary gearboxes with integer number of teeth

When designing a planetary gearbox, one must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

China Professional High Torque Helical Gear 400W Motor Planetary Gearbox advantages of planetary gearbox
editor by Dream 2024-05-06

China Hot selling CZPT MD022022-864 22mm 15kg. Cm 9rpm High Torque Low Speed 6V 12V DC Electric Wheel Motor Gear Box with Encoder small planetary gearbox

Product Description

CZPT 22MM DC Planetary metal gearbox brushless dc Gear Motor

Product Description

above specifications just for reference and customizable according to requirements.

motor specifications:22mm brushless motor coreless motor stepper motor
motors (optional)	brushless dc motor,stepper motor,coreless motor
voltage(optional)	3-24v
input speed	<=15000rpm
current	300mA max

performance Data:22mm Planetary Metal Gearbox brush motor / brushless motor / Stepper Motor / Coreless Motor
Model	Rated Speed	Max Speed	Max Rated Torque	Max Instant Torque	Reduction Ratio	Gearbox Length	Overall Length
	rpm	rpm	gf.cm	gf.cm		mm	mm
MD571571-4	1875	7500	15000	36000	4	19.1	57.5
MD571571-6	1250	5000	15000	36000	6	19.1	57.5
MD571571-16	469	1875	15000	36000	16	26.4	64.8
MD571571-24	313	1250	15000	36000	24	26.4	64.8
MD571571-36	208	833	15000	36000	36	26.4	64.8
MD571571-64	117	469	15000	36000	64	33.7	72.1
MD571571-96	78	313	15000	36000	96	33.7	72.1
MD571571-144	52	208	15000	36000	144	33.7	72.1
MD571571-216	35	139	15000	36000	216	33.7	72.1
MD571571-256	29	117	15000	36000	256	41	79.4
MD571571-384	20	78	15000	36000	384	41	79.4
MD571571-576	13	52	15000	36000	576	41	79.4
MD571571-864	9	35	15000	36000	864	41	79.4
MD571571-1296	6	23	15000	36000	1296	41	79.4
* The above specifications are subject to change without prior notice. They are for reference only and can be customized as required.

Please let us know your requirements and we will provide you with micro transmission solutions.

Product details show:

Application

Smart wearable devices	watch,VR,AR,XR and etc.
Household application	kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc.
communication equipment	5G base station,video conference,mobile phone and etc.
Office automation equipments	scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine, screen, lifting socket, display,notebook PC and etc.
Automotive products	conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc.
Toys and models	radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc.
Medical equipments	blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
Industrials	flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc.
Electric power tools	electric drill, screwdriver,garden tool and etc.
Precision instruments	optics instruments,automatic vending machine, wire-stripping machine and etc.
Personal care	tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc.
Consumer electronics	camera, mobile phone,digital camera, automatic retracting device,camcorder, kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc.
robots	educational robot, programming robot, medical robot, escort robot and etc.

Company Profile

HangZhou CZPT Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly.

Workshop

Testing Equipment

1) Competitive Advantages

1) Competitive Advantages
19+year experience in manufacturing motor gearbox
We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
Competitive Price
Product Performance: Low noise, High efficiency, Long lifespan
Prompt Delivery: 15 working days after payment
Small Orders Accepted

2) Main Products

Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,
Customized worm and gear transmission machinery;
Precise electromechanical motion module;
Precise component and assembly of plastic and metal powder injection.

Our Services

ODM & OEM
Gearbox design and development
Related technology support
Micro drive gearbox custom solution

Packaging & Shipping

1) Packing Details

packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.

2) Shipping Details

samples will be shipped within 10 days;
batch order leading time according to the actual situation.

Certifications

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…

FAQ

FAQ

1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.

2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.

4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.

5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.

6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide.

7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.

8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.

10. How do contact us ?
Please send an inquiry

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	High Speed
Excitation Mode:	Permanent Magnet
Function:	Control, Driving
Casing Protection:	Drip-Proof
Number of Poles:	4

Customization:	Available \| Customized Request

planetarygearbox

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China Hot selling CZPT MD022022-864 22mm 15kg. Cm 9rpm High Torque Low Speed 6V 12V DC Electric Wheel Motor Gear Box with Encoder small planetary gearbox
editor by Dream 2024-04-27

China manufacturer High Output Torque Density 1.5kw Planetary Gearbox for Stepper Motor planetary gearbox bearings

Product Description

High output torque density 1.5KW planetary gearbox for stepper motor is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

Fubao planetary reducer manufacturers, supply of High output torque density 1.5KW planetary gearbox for stepper motor has the following advantages:

1, compact structure: the characteristics of large torque planetary reducer is to make full use of space, limited space design bearing and gear ratio, so that the product is smaller than the traditional reducer volume can save space.

2, high efficiency: the planetary gear group will be in a completely tight meshing state when running, reducing gear collision or local meshing resulting in gear damage. The completely tight meshing characteristic makes the efficiency loss of each gear transmission only 3%. This type of transmission mode can ensure that the kinetic energy input reducer to the mechanical end of the process, still can maintain high transmission efficiency, avoid the internal gear friction, sliding, mechanical loss.

3, high axial and radial load capacity: the output shaft of Fubao technology’s high-torque planetary reducer adopts a large-span style, so that the bearing is configured at both ends of the output shaft. The design can effectively disperse the force acting on the output shaft and reduce the load of the bearing. In other words, the product strengthens the bearing and radial load capacity under the same size.

4, high strength: large torque planetary reducer gear group is very strong and stable, the thickness of the gear dispersed the load on the gear. The large span bearing group provides a stable structure, and the precision gear group allows the load to be distributed to each planetary gear under tight meshing to withstand the torque load.

5, high stability: precision processing to ensure that the product coaxial and concentric, coupled with bearing large span design, so that large torque planetary reducer with excellent stability.

Detailed Photos

Product Details

Other products

Product Advantage

Compared with other reduction machines, planetary gear reduction machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics, planetary gear reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Company Profile

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost: Estimated freight per unit.	To be negotiated

Application:	Motor, Machinery, Agricultural Machinery, Mechanical Equipment
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction, Speed Increase, Lower The Speed and Increase The Torque
Layout:	Coaxial

Customization:	Available \| Customized Request

planetarygearbox

Planetary Gearbox

planetary gearboxes

Their design

Applications

Maintenance

China manufacturer High Output Torque Density 1.5kw Planetary Gearbox for Stepper Motor planetary gearbox bearings
editor by CX 2023-04-23

China Zd Zero Low Backlash Torque Automation Robot CNC Reducer NEMA 23 Stepper Servo Motor Super Helical Gear Small Micro Epicyclic High Precision Planetary Gearbox with Good quality

Solution Description

Zd Zero Low Backlash Torque Automation Robotic CNC Reducer NEMA 23 Stepper Servo Motor Tremendous Helical Equipment Small Micro Epicyclic Higher Precision Planetary Gearbox

Product Description

one. It is primarily utilized for servo motor/stepping motor, with the biggest traits of substantial precision and huge transmission capability.

two. It can also be geared up with energy resources these kinds of as DC motor, one-phase motor, synchronous motor and various a few-phase asynchronous motors.

3. Precision planetary equipment reducer, also acknowledged as servo planetary gear reducer, adopts planetary equipment composition style, adopts high-performance alloy metal for specific heat remedy, and flanges are produced of aluminum alloy, which is characterised by beautiful look, tiny quantity, light bodyweight, huge transmission ratio, massive torque, low noise, high performance, extended services daily life, and so on.

four. Totally enclosed and internally stuffed with higher-performance grease, cost-free of routine maintenance for life.


7 sices: 42mm-220mm Output torque: 14Nm-2000Nm Ratio: 1-phase:3/4/5/6/7/8/9/10 2-phase: fifteen/twenty/25/30/35/40/forty five/50 /sixty/70/eighty/90/100 Backlash: one-phase:≤1, ≤3, ≤5 arcmin 2-stage:≤3, ≤5, ≤7 arcmin	seven sices: 42mm-220mm Output torque: 9Nm-2000Nm Ratio: one-phase:3/4/5/6/7/8/9/ten/14/20 two-phase:fifteen/20/25/thirty/35 /forty/forty five/fifty/60/70/80/90/one hundred /one hundred twenty/140/one hundred sixty/one hundred eighty/two hundred Backlash: one-phase:≤2, ≤4, ≤6 arcmin 2-stage:≤4, ≤7, ≤9 arcmin	7 sices: 47mm-255mm Output torque: 14Nm-2000Nm Ratio: one-stage:4/5/6/7/8/ten 2-phase: twenty/twenty five/30/35/40/fifty/60/70/80/one hundred Backlash: 1-phase:≤1, ≤3, ≤5 arcmin 2-stage:≤3, ≤5, ≤7 arcmin	seven sices: 47mm-255mm Output torque: 14Nm-2000Nm Ratio: 1-stage:4/5/6/7/8/ten/fourteen/20 two-stage:20/25/thirty/35/forty/fifty/sixty/70/ 80/one hundred/a hundred and forty/two hundred Backlash: one-stage:≤2, ≤4, ≤6 arcmin two-phase:≤4, ≤7, ≤9 arcmin

7 sices: 42mm-220mm Output torque: 14Nm-2000Nm Ratio: 1-phase:3/4/5/6/7/8/9/10 two-phase:15/20/25/30/35/40/45 /50/60/70/eighty/90/a hundred Backlash: one-stage:≤5 arcmin two-stage:≤8 arcmin	seven sices: 70mm-235mm Output torque: 14Nm-2000Nm Ratio: one-phase:3/4/5/6/7/8/9/ten two-phase:15/20/25/thirty/35/40/forty five/ 50/60/70/eighty/ninety/100/ Backlash: one-phase:≤5 arcmin 2-stage:≤8 arcmin	10 sices: 40mm-160mm Output torque: 9Nm-423Nm Ratio: 1-stage:3/4/5/7/8/ten two-stage:twelve/15/20/25/thirty/35/ 40/fifty/70/one hundred Backlash: 1-phase:≤6, ≤8 arcmin 2-stage:≤8, ≤10 arcmin

one. Square housing, reliable shaft enter, reliable shaft output, flange relationship.

2. It is broadly utilized, inexpensive and sensible, and has a prolonged life. In the application of servo manage, it has performed a excellent servo rigidity effect, correct positioning handle, and has the traits of minimal back again clearance, large performance, high input velocity, substantial input torque, easy operation, minimal sounds, and so on. on the operating platform. Its visual appeal and composition design and style are mild and little.

Type AND Product NUMBER

PL 80 – 40 P2 S2 OP1

1 2 3 4 5 6

Planetary Gearbox Body Code:

PL: Round flange mounting Series

WPL: Appropriate-angle Round flange mounting Series

PF:Sq. flange mounting Series

WPF: Proper-angle Sq. flange mounting Collection

HAB: Higher Rigidity large precision Sq. housing Sequence

WHAB: Right-angle Substantial Rigidity large precision Square housing Collection

HAT: Right-angle Double flange Double shaft Collection

Ratio	Solitary phase:3,4,5,7,8,ten Doublestages:9,10,12,fifteen,sixteen,20,25,thirty,32,35,forty,50,sixty four,70,100 3 phases:60,eighty,100,one hundred twenty,160,200,256,320,512
Backlash	P1:Precision P2:Regular
Output shaft type	S1: Shaft without crucial S2: Shaft with crucial T: Special require
Enter shaft variety	S1: Shaft with out essential S2: Shaft with crucial T: Specific call for
Enter shaft sort	OP1: Integral Hoop clamp coupling OP2: Break up type Hoop clamp coupling (without keyway) OP3: Integral Hoop clamp coupling with keyway OP4: Reinforcement Integral Hoop clamp coupling( suited for usually CW and CCW) OP5: Only keyway join coupling OP6: Other type hook up coupling

Dimension over PL120(such as) substantial torque products adopt integral double wall earth pinion provider, improve the output toughness and precision.

Hoop clamp coupling have 5 relationship techniques appropriate for various software environments:

Size above PL120(such as) precision and substantial toughness integral interior gear housing, processed in 1 station, which eliminate the cumulative mistake and assembling mistake of break up sort. Get rid of casting method adopt very hot forging procedure, which will lessen the blank content defects.

The meshing gear adopt shaving approach following carburizing and quenching, which simpler to make gear surface sleek and substantial precision, lessen the temperature climbing triggered by equipment surface gluing and friction.

Related merchandise

Software

Goal/software area
It is progressively extensively utilized in metallurgy, mining, petroleum, chemical sector, delivery, gentle business, meals, textile, printing and dyeing, pharmacy, rubber, plastic, and lifting transportation.

Guidelines
one. When putting in the reducer, consideration shall be compensated to the alignment of the transmission center axis, and the error shall not be increased than the use payment of the coupling utilised. Very good alignment can extend provider life and get excellent transmission effectiveness.
2. When putting in the transmission elements on the output shaft, it is not permitted to strike with a hammer. Usually, the transmission elements are pressed in with bolts by using the assembly fixture and the interior thread of the shaft conclude, in any other case the internal elements of the reducer may possibly be ruined. It is greater not to use rigid fastened coupling. Poor set up of this kind of coupling will trigger unneeded exterior load, ensuing in early injury to the bearing and even fracture of the output shaft in extreme instances.
three. The reducer shall be firmly mounted on a steady and horizontal basis or foundation, the oil in the oil drain tank shall be drained, and the cooling air circulation shall be easy. The foundation is not reliable, which will lead to vibration and noise during procedure, and cause hurt to bearings and gears. When the transmission connecting areas have protrusions or are driven by gears and sprockets, it shall be regarded to install protecting products. When the output shaft bears a huge radial load, the bolstered type shall be selected.
four. The installation system shall be in accordance with the provisions to ensure that the employees can very easily approach the oil pointer, vent plug and drain plug. Right after the set up is in location, the accuracy of the installation place and the trustworthiness of each and every fastener pressing shall be comprehensively checked in buy. After the set up, it shall be CZPT to rotate flexibly. The reducer is lubricated by oil pool splash. Ahead of operation, the person wants to get rid of the plug of the vent and change it with a vent plug. In accordance to diverse set up positions, open the oil stage plug screw to check out the height of the oil stage line. Include oil from the oil level plug until finally the lubricating oil overflows from the screw gap of the oil level plug. After the oil level plug is screwed on and confirmed to be proper, the no-load test operate can be carried out, and the time shall not be much less than 2 hrs. The operation shall be steady with no shock, vibration, sound and oil leakage, and any abnormality shall be removed in time.
After a specific time period of time, the oil degree should be checked once more to avoid feasible leakage brought on by the casing. If the ambient temperature is as well substantial or too minimal, the brand name of lubricating oil can be changed.

Company Profile

Our business is a actual physical factory specializing in the generation of planetary gear reducers. We have an skilled technical team and sophisticated processing tools. By way of digestion and integration of the world’s top production procedures, we have shaped a common mature system. We are an early maker of substantial-precision reducers in mainland China. Now the item supporting scope has coated the automation fields these kinds of as bending equipment, machine resource, slicing device, woodworking equipment, glass, chemical fiber, textile, packaging, robotic, and so on., and has been commonly praised. Planetary gear reducer is suitable for servo and stepping motors of Panasonic, Mitsubishi, Delta, Siemens, Xihu (West Lake) Dis.yuan, CZPT and other domestic and overseas producers, and supplies complex assist in non-standard fields. We appear ahead to cooperating with you!

Our equipments

Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Planetary
Gear Shape:	Bevel Gear
Step:	Stepless
Type:	Planetary Gear Reducer

###

Samples:	US$ 120/Piece 1 Piece(Min.Order) \| Request Sample

###


7 sices: 42mm-220mm Output torque: 14Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10 2-stage: 15/20/25/30/35/40/45/50 /60/70/80/90/100 Backlash: 1-stage:≤1, ≤3, ≤5 arcmin 2-stage:≤3, ≤5, ≤7 arcmin	7 sices: 42mm-220mm Output torque: 9Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10/14/20 2-stage:15/20/25/30/35 /40/45/50/60/70/80/90/100 /120/140/160/180/200 Backlash: 1-stage:≤2, ≤4, ≤6 arcmin 2-stage:≤4, ≤7, ≤9 arcmin	7 sices: 47mm-255mm Output torque: 14Nm-2000Nm Ratio: 1-stage:4/5/6/7/8/10 2-stage: 20/25/30/35/40/50/60/70/80/100 Backlash: 1-stage:≤1, ≤3, ≤5 arcmin 2-stage:≤3, ≤5, ≤7 arcmin	7 sices: 47mm-255mm Output torque: 14Nm-2000Nm Ratio: 1-stage:4/5/6/7/8/10/14/20 2-stage:20/25/30/35/40/50/60/70/ 80/100/140/200 Backlash: 1-stage:≤2, ≤4, ≤6 arcmin 2-stage:≤4, ≤7, ≤9 arcmin

7 sices: 42mm-220mm Output torque: 14Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10 2-stage:15/20/25/30/35/40/45 /50/60/70/80/90/100 Backlash: 1-stage:≤5 arcmin 2-stage:≤8 arcmin	7 sices: 70mm-235mm Output torque: 14Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10 2-stage:15/20/25/30/35/40/45/ 50/60/70/80/90/100/ Backlash: 1-stage:≤5 arcmin 2-stage:≤8 arcmin	10 sices: 40mm-160mm Output torque: 9Nm-423Nm Ratio: 1-stage:3/4/5/7/8/10 2-stage:12/15/20/25/30/35/ 40/50/70/100 Backlash: 1-stage:≤6, ≤8 arcmin 2-stage:≤8, ≤10 arcmin

###

Ratio	Single stage:3,4,5,7,8,10 Doublestages:9,10,12,15,16,20,25,30,32,35,40,50,64,70,100 Three stages:60,80,100,120,160,200,256,320,512
Backlash	P1:Precision P2:Standard
Output shaft type	S1: Shaft without key S2: Shaft with key T: Special require
Input shaft type	S1: Shaft without key S2: Shaft with key T: Special require
Input shaft type	OP1: Integral Hoop clamp coupling OP2: Split type Hoop clamp coupling (without keyway) OP3: Integral Hoop clamp coupling with keyway OP4: Reinforcement Integral Hoop clamp coupling( suitable for frequently CW and CCW) OP5: Only keyway connect coupling OP6: Other type connect coupling

Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Planetary
Gear Shape:	Bevel Gear
Step:	Stepless
Type:	Planetary Gear Reducer

###

Samples:	US$ 120/Piece 1 Piece(Min.Order) \| Request Sample

###


7 sices: 42mm-220mm Output torque: 14Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10 2-stage: 15/20/25/30/35/40/45/50 /60/70/80/90/100 Backlash: 1-stage:≤1, ≤3, ≤5 arcmin 2-stage:≤3, ≤5, ≤7 arcmin	7 sices: 42mm-220mm Output torque: 9Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10/14/20 2-stage:15/20/25/30/35 /40/45/50/60/70/80/90/100 /120/140/160/180/200 Backlash: 1-stage:≤2, ≤4, ≤6 arcmin 2-stage:≤4, ≤7, ≤9 arcmin	7 sices: 47mm-255mm Output torque: 14Nm-2000Nm Ratio: 1-stage:4/5/6/7/8/10 2-stage: 20/25/30/35/40/50/60/70/80/100 Backlash: 1-stage:≤1, ≤3, ≤5 arcmin 2-stage:≤3, ≤5, ≤7 arcmin	7 sices: 47mm-255mm Output torque: 14Nm-2000Nm Ratio: 1-stage:4/5/6/7/8/10/14/20 2-stage:20/25/30/35/40/50/60/70/ 80/100/140/200 Backlash: 1-stage:≤2, ≤4, ≤6 arcmin 2-stage:≤4, ≤7, ≤9 arcmin

7 sices: 42mm-220mm Output torque: 14Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10 2-stage:15/20/25/30/35/40/45 /50/60/70/80/90/100 Backlash: 1-stage:≤5 arcmin 2-stage:≤8 arcmin	7 sices: 70mm-235mm Output torque: 14Nm-2000Nm Ratio: 1-stage:3/4/5/6/7/8/9/10 2-stage:15/20/25/30/35/40/45/ 50/60/70/80/90/100/ Backlash: 1-stage:≤5 arcmin 2-stage:≤8 arcmin	10 sices: 40mm-160mm Output torque: 9Nm-423Nm Ratio: 1-stage:3/4/5/7/8/10 2-stage:12/15/20/25/30/35/ 40/50/70/100 Backlash: 1-stage:≤6, ≤8 arcmin 2-stage:≤8, ≤10 arcmin

###

Ratio	Single stage:3,4,5,7,8,10 Doublestages:9,10,12,15,16,20,25,30,32,35,40,50,64,70,100 Three stages:60,80,100,120,160,200,256,320,512
Backlash	P1:Precision P2:Standard
Output shaft type	S1: Shaft without key S2: Shaft with key T: Special require
Input shaft type	S1: Shaft without key S2: Shaft with key T: Special require
Input shaft type	OP1: Integral Hoop clamp coupling OP2: Split type Hoop clamp coupling (without keyway) OP3: Integral Hoop clamp coupling with keyway OP4: Reinforcement Integral Hoop clamp coupling( suitable for frequently CW and CCW) OP5: Only keyway connect coupling OP6: Other type connect coupling

Benefits of a Planetary Gearbox With Output Shaft

The output shaft of a Planetary Gearbox connects to the driven wheels, while the input shaft comes from the engine. These gears are interlinked and create a wide range of gear reductions, which are necessary to get a vehicle rolling comfortably. Gear reductions are the place where the various “gears” are located. Here are some examples. They can help you determine what you need for your vehicle. You might also want to learn about planetary gears.
planetarygearbox

Planetary gearboxes

Modern cars are most likely equipped with planetary gearboxes. If you’re unsure if your vehicle uses planetary gears, you should first consult your car’s owner’s manual. If not, contact your dealership’s service department for more information. Otherwise, you can do a quick search on the internet to find out whether your car has a planetary gearbox. These gearboxes are generally more complex than ordinary gears. Additionally, they are equipped with more parts and require lubrication.
In addition to their low noise levels, planetary gearboxes are also remarkably efficient at transmission. These features make them ideal for applications requiring high torque and small footprints. Unfortunately, there are many different types of planetary gearboxes on the market, making it difficult to find the right one. The following article will give you some guidelines to help you choose the right planetary gearbox for your needs. Let’s take a look!

Planetary gears

A planetary gearbox has two main components: the sun gear (also known as the central or input) and the planet gears (also known as outer or peripheral). These gears are connected together by a carrier to the output shaft of the machine. In some applications, it is necessary to use a planetary gearbox with lubrication to prevent wear and tear. A planetary gearbox also has a small ring gear that helps hold the planet gears together.
The main advantage of a planetary gearbox is that it uses several teeth that engage at once, allowing for high-speed reduction with a small number of gears. Because the gears are relatively small, they have lower inertia than their larger counterparts. Planetary gearboxes are compact, which makes them popular for space-constrained applications. Because of their compact size and efficiency, planetary gearboxes are also commonly used in motor vehicles.

Planetary gearboxes with output shaft

For high-speed, dynamic applications, planetary gearbox units with output shaft provide the optimal solution. Thanks to their low inertia, these gearheads deliver superior performance in many industrial applications. Additionally, their wide range of variants allows users to select the perfect product for their application. This article examines some of the key benefits of planetary gearboxes with output shaft. Read on to learn more.
The planetary gearbox has two major components: a sun gear and planet gears. The sun gear is usually the input gear, while the planet gears are located at the outer edges of the system casing. Planet gears are held together by a carrier that is connected to the output shaft. Before choosing a particular gearbox for your application, make sure that you check the specific requirements and the environment to which the unit will be subjected.
A planetary gearbox has less stages of gears, and thus lower backlash compared to spur gearboxes. Backlash is lost motion that occurs when the teeth of the gears are out of perfect alignment. This problem is common in all gears, but is significantly less in planetary gearboxes. As such, planetary gearboxes are more efficient. They can also be customized according to the specific engine model and motor flange.
planetarygearbox

Planetary gearboxes with carrier

A planetary gearbox is a type of gearbox with three or more stages. They have a sun gear, which is usually the input gear, and planet gears, also called the outer gears. The carrier that connects the planet gears to the output shaft is called a ring gear. A planetary gearbox is generally designed to meet specific application and environmental requirements, but there are some factors to consider when choosing one.
The compact footprint of planetary gear sets results in high heat dissipation. This can be a problem in applications with sustained performance or high speeds. As a result, planetary gear sets often include lubricants, which present a cooling effect while also reducing noise and vibration. Some planetary gears even feature a carrier to make the installation process easier. Here are some things to keep in mind when choosing a planetary gear set.
Planetary gearboxes with carrier have several advantages over other types of gearboxes. Unlike conventional gearboxes, planetary gears have a common central shaft, and the tangential forces between the gears cancel out at the center of the ring gear. Because of this, planetary gearboxes are commonly used in input/output applications, and their compact size allows for a wide range of gear reductions. These gears can also produce higher torque density.

Planetary gearboxes with traction

Planetary gears are similar to the planetary system, in that each pinion rotates around a sun gear. The output of the planetary gear unit is lower than the drive rotation speed, but the torque is higher. As the number of planet gear wheels increases, so does the torque. Planetary gear systems contain three to four planet gears, and each is in constant mesh with the others. Power applied to any one member rotates the entire assembly.
Typical applications for planetary gear sets include high-precision motion control. In these applications, high torque, torsional stiffness, and low backlash are required. Planetary gear sets are also ideal for motors with higher speeds. A number of factors contribute to the reliability of these devices. The low backlash and large torque capacity of a planetary gear motor allow them to be used in a wide range of applications.

Planetary gearboxes with electric motors

If you’re in the market for a new gearbox, you may have already heard about planetary gearboxes. The planetary gearbox is a high-efficiency, low-noise gearbox. CZPT manufactures high-torque planetary gearboxes with low backlash. They also make economy planetary gearboxes for lower loads. However, with so many different types available, choosing the right one for your needs can be challenging.
These planetary gearboxes are a compact alternative to conventional pinion-and-gear reducers. They offer high-speed reduction and high torque transfer, and are often used for space-constrained applications. But before you can understand how they work, you’ll need to understand a little about their construction. There are a few things to look for that you may not have noticed before.
The most common type of planetary gearbox is a PM81/LN. It features a set of DC brush motors with diameter 77mm, a stator, and two or more outer gears. Each of these gears is connected to an output shaft through a carrier. They can also be used with brakes, encoders, or a clutch. A planetary gearbox is one of the most reliable gearbox types on the market.

Planetary gearboxes with hydraulic motors

A planetary gearbox is a combination of two gears, the sun and the planets. The sun gear rotates at high speed, while the planets roll around and orbit around the ring gear. The output shaft has the same direction of rotation as the input shaft. The benefits of a planetary gearbox include high reduction ratios, efficiency, space-saving compactness, and higher overload capacity. These gears are also more stable and compact, and they do not suffer from self-locking properties.
Planetary gearboxes are a highly efficient way to power hydraulic lifts. They can be input via electric, hydraulic, or air motors. The drive arrangement can be mounted on a bare shaft, splined shaft, or a parallel keyed input shaft. Depending on the application, bespoke gearboxes can be manufactured with a variety of features and functions.
planetarygearbox

Planetary gearboxes with combustion engines

There are many different applications of planetary gear sets. The most common is the distribution of power between two wheels in a car’s drive axle. Four-wheel drives use two axle differentials, which are further augmented by a centre differential. Hybrid electric vehicles use summation gearboxes to distribute power from the combustion engine to the wheels and to an electric motor. Planetary gear sets also combine the two different types of motors to form one hybrid vehicle.
To understand how planetary gear sets work, it is important to understand the underlying mechanical principles. For example, Fig. 4.6 shows a stick diagram illustrating two planetary gear sets connected by a lever. The two levers are the same length, so the system is analogous to a single lever. When calculating the torque, it is essential to consider the lever diagram. Similarly, if two gear sets are connected by vertical links, the horizontal links must be horizontal.

China Zd Zero Low Backlash Torque Automation Robot CNC Reducer NEMA 23 Stepper Servo Motor Super Helical Gear Small Micro Epicyclic High Precision Planetary Gearbox with Good quality
editor by czh 2023-01-30

China High Torque Helical Gear 400W Motor Planetary Gearbox custom planetary gearbox

Product Description

Higher Torque Helical Gear 400W Motor Planetary Gearbox

The principal transmission construction of planetary reducer is planetary equipment, sun equipment, inner gear ring and planetary provider. Planetary equipment reducer has the positive aspects of little quantity, substantial transmission effectiveness, wide deceleration variety and large precision. It is extensively utilised in the transmission system of servo motor, stepping motor, DC motor and other motors. Its perform is to minimize velocity, enhance torque, minimize load and motor second of inertia ratio on the premise of ensuring precision transmission.

Product Description

one.With bevel equipment reversing system,proper angle steering output is realized’
two.Circycle output,threaded connection,regular dimensions
3.The enter specs are completes and there are several options
4.Spur transmission,one cantilever composition,design and style simple,high expense efficiency
five.Keyway can be opened in the force shaft
six.steady operation and reduced sound
seven.Measurement range:60-120mm
8.Ratio assortment:3-a hundred
nine.Precision assortment:8-16arcmin
10.Assistance personalized according to drawings or samples

Item Parameters

Specifications				PVLN60	PVLN90	PVLN120
Technal Parameters				PVLN60	PVLN90	PVLN120
Max. Torque			Nm	1.5times rated torque
Emergency Quit Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	450	1240
Max. Axial Load			N	220	430	1000
Torsional Rigidity			Nm/arcmin	1.eight	4.eighty five	eleven
Max.Input Speed			rpm	8000	6000	6000
Rated Enter Pace			rpm	4000	3500	3500
Noise			dB	≤58	≤60	≤65
Average Daily life Time			h	20000
Efficiency Of Entire Load			%	L1≥95% L2≥92%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20
Minute Of Inertia Table	L1	3	Kg*cm2	.46	one.73	twelve.seventy eight
		four	Kg*cm2	.forty six	one.73	twelve.78
		five	Kg*cm2	.46	one.73	12.seventy eight
		seven	Kg*cm2	.41	one.forty two	eleven.38
		10	Kg*cm2	.41	1.42	eleven.38
	L2	twelve	Kg*cm2	.44	one.forty nine	twelve.eighteen
		fifteen	Kg*cm2	.forty four	1.forty nine	12.18
		sixteen	Kg*cm2	.72	one.49	12.eighteen
		20	Kg*cm2	.forty four	one.49	twelve.18
		twenty five	Kg*cm2	.44	one.forty nine	12.18
		28	Kg*cm2	.forty four	one.forty nine	12.18
		30	Kg*cm2	.forty four	1.49	12.18
		35	Kg*cm2	.forty four	1.49	12.eighteen
		40	Kg*cm2	.44	1.49	twelve.18
		50	Kg*cm2	.34	1.25	11.forty eight
		70	Kg*cm2	.34	one.25	11.forty eight
		one hundred	Kg*cm2	.34	one.25	11.forty eight
Specialized Parameter	Degree	Ratio		PVLN60	PVLN90	PVLN120
Rated Torque	L1	3	Nm	27	ninety six	161
		four	Nm	forty	122	210
		5	Nm	40	122	210
		7	Nm	34	ninety five	170
		ten	Nm	16	56	86
	L2	twelve	Nm	27	96	161
		fifteen	Nm	27	96	161
		sixteen	Nm	forty	122	210
		20	Nm	40	122	210
		twenty five	Nm	40	122	210
		28	Nm	40	122	210
		thirty	Nm	27	ninety six	161
		35	Nm	40	122	210
		forty	Nm	forty	122	210
		fifty	Nm	forty	122	210
		70	Nm	34	ninety five	a hundred and seventy
		a hundred	Nm	sixteen	56	86
Degree Of Security				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	1.7	4.4	12
Weight	L2		kg	one.nine	five	14

Business Profile

Packaging & Delivery

one. Lead time: ten-fifteen times as typical, 30 times in active season, it will be primarily based on the detailed order quantity
two. Shipping: DHL/ UPS/ FEDEX/ EMS/ TNT

US $184-613
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machine Tool
Speed:	High Speed
Function:	Driving
Casing Protection:	Protection Type
Certification:	ISO9001
Brand:	Newgear

###

Samples:	US$ 413/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PVLN60	PVLN90	PVLN120
Technal Parameters				PVLN60	PVLN90	PVLN120
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	450	1240
Max. Axial Load			N	220	430	1000
Torsional Rigidity			Nm/arcmin	1.8	4.85	11
Max.Input Speed			rpm	8000	6000	6000
Rated Input Speed			rpm	4000	3500	3500
Noise			dB	≤58	≤60	≤65
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥92%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.46	1.73	12.78
		4	Kg*cm2	0.46	1.73	12.78
		5	Kg*cm2	0.46	1.73	12.78
		7	Kg*cm2	0.41	1.42	11.38
		10	Kg*cm2	0.41	1.42	11.38
	L2	12	Kg*cm2	0.44	1.49	12.18
		15	Kg*cm2	0.44	1.49	12.18
		16	Kg*cm2	0.72	1.49	12.18
		20	Kg*cm2	0.44	1.49	12.18
		25	Kg*cm2	0.44	1.49	12.18
		28	Kg*cm2	0.44	1.49	12.18
		30	Kg*cm2	0.44	1.49	12.18
		35	Kg*cm2	0.44	1.49	12.18
		40	Kg*cm2	0.44	1.49	12.18
		50	Kg*cm2	0.34	1.25	11.48
		70	Kg*cm2	0.34	1.25	11.48
		100	Kg*cm2	0.34	1.25	11.48
Technical Parameter	Level	Ratio		PVLN60	PVLN90	PVLN120
Rated Torque	L1	3	Nm	27	96	161
		4	Nm	40	122	210
		5	Nm	40	122	210
		7	Nm	34	95	170
		10	Nm	16	56	86
	L2	12	Nm	27	96	161
		15	Nm	27	96	161
		16	Nm	40	122	210
		20	Nm	40	122	210
		25	Nm	40	122	210
		28	Nm	40	122	210
		30	Nm	27	96	161
		35	Nm	40	122	210
		40	Nm	40	122	210
		50	Nm	40	122	210
		70	Nm	34	95	170
		100	Nm	16	56	86
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	1.7	4.4	12
Weight	L2		kg	1.9	5	14

US $184-613
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machine Tool
Speed:	High Speed
Function:	Driving
Casing Protection:	Protection Type
Certification:	ISO9001
Brand:	Newgear

###

Samples:	US$ 413/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specifications				PVLN60	PVLN90	PVLN120
Technal Parameters				PVLN60	PVLN90	PVLN120
Max. Torque			Nm	1.5times rated torque
Emergency Stop Torque			Nm	2.5times rated torque
Max. Radial Load			N	240	450	1240
Max. Axial Load			N	220	430	1000
Torsional Rigidity			Nm/arcmin	1.8	4.85	11
Max.Input Speed			rpm	8000	6000	6000
Rated Input Speed			rpm	4000	3500	3500
Noise			dB	≤58	≤60	≤65
Average Life Time			h	20000
Efficiency Of Full Load			%	L1≥95% L2≥92%
Return Backlash	P1	L1	arcmin	≤8	≤8	≤8
	P1	L2	arcmin	≤12	≤12	≤12
	P2	L1	arcmin	≤16	≤16	≤16
	P2	L2	arcmin	≤20	≤20	≤20
Moment Of Inertia Table	L1	3	Kg*cm2	0.46	1.73	12.78
		4	Kg*cm2	0.46	1.73	12.78
		5	Kg*cm2	0.46	1.73	12.78
		7	Kg*cm2	0.41	1.42	11.38
		10	Kg*cm2	0.41	1.42	11.38
	L2	12	Kg*cm2	0.44	1.49	12.18
		15	Kg*cm2	0.44	1.49	12.18
		16	Kg*cm2	0.72	1.49	12.18
		20	Kg*cm2	0.44	1.49	12.18
		25	Kg*cm2	0.44	1.49	12.18
		28	Kg*cm2	0.44	1.49	12.18
		30	Kg*cm2	0.44	1.49	12.18
		35	Kg*cm2	0.44	1.49	12.18
		40	Kg*cm2	0.44	1.49	12.18
		50	Kg*cm2	0.34	1.25	11.48
		70	Kg*cm2	0.34	1.25	11.48
		100	Kg*cm2	0.34	1.25	11.48
Technical Parameter	Level	Ratio		PVLN60	PVLN90	PVLN120
Rated Torque	L1	3	Nm	27	96	161
		4	Nm	40	122	210
		5	Nm	40	122	210
		7	Nm	34	95	170
		10	Nm	16	56	86
	L2	12	Nm	27	96	161
		15	Nm	27	96	161
		16	Nm	40	122	210
		20	Nm	40	122	210
		25	Nm	40	122	210
		28	Nm	40	122	210
		30	Nm	27	96	161
		35	Nm	40	122	210
		40	Nm	40	122	210
		50	Nm	40	122	210
		70	Nm	34	95	170
		100	Nm	16	56	86
Degree Of Protection				IP65
Operation Temprature			ºC	– 10ºC to -90ºC
Weight	L1		kg	1.7	4.4	12
Weight	L2		kg	1.9	5	14

Types, Applications, and Lubrication of Planetary Gearboxes

A Planetary Gearbox is a device that can be used in a variety of applications. Their reduction ratios depend on the number of teeth in each gear. In this article, we will discuss the types, applications, and lubrication of planetary gearboxes. Hopefully, this article will be of help to you. If not, you can check out this article and discover more about this fascinating machine. There are many different types of planetary gearboxes.
planetarygearbox

Applications of planetary gearboxes

The planetary gearbox is a popular option for applications requiring precise positioning. Applications of the planetary gearbox range from plastic machinery to agricultural equipment, from goods & personnel lifts to industrial robotics. Some of the industries that benefit from this type of gearbox include robotics, intra-logistics, robotics for industrial automation, and medical equipment. Increasing automation is also fueling the growth of the industrial planetary gearbox market in APAC.
The compact design of planetary gears makes them excellent for reducing load inertia and maximizing torque. However, some applications require additional lubrication for sustained performance or high speeds. CZPT uses CZPT in its planetary gearboxes. In addition, lubrication prevents gear wear and minimizes noise and vibration. The planetary gearbox is also easy to install, thanks to its low-mass-inertia design.
Another application of the planetary gearbox is in axles and transfer cases. The planetary gear architecture consists of a sun gear, also called the central gear, and a ring-gear with internal teeth that are concentric to the sun gear. The two gears are connected via a carrier, and the output shaft is positioned on the ring-gear carrier. The gearbox can be configured in a variety of ways, depending on the speed-ratio requirements.
The planetary gear train is similar to that of a solar system. It comprises a sun gear and two or more outer gears, ring gear and carrier assembly. In this configuration, the outer gears are connected via a carrier and a ring gear. The planet gears are in constant mesh with each other, and power applied to one of these members will rotate the whole assembly. They are a very efficient choice for many applications.

Types

There are three types of planetary gearboxes, depending on their performance and efficiency. The basic model is highly efficient and transmits up to 97% of power input. Depending on the speed and torque that need to be transmitted, planetary gearboxes are used in many different applications. A planetary gearbox can reduce the speed of a roller or produce a more precise level of movement. Using a planetary gearbox for your printing press, for example, will maximize your gear transmission ratio.
This market research report analyzes the factors influencing the market for Planetary Gearboxes, as well as their sales and revenues. It also highlights industry trends and details the competitive landscape. It also provides a comprehensive analysis of the Planetary Gearbox industry and its drivers and restraints. It provides detailed information on the market size and future growth prospects. The study also includes an extensive discussion of the competitive landscape, identifying the top companies and key market players.
A planetary gearbox is often used to manufacture complicated machines. These gears are usually made of high-quality steel, which makes them extremely durable. Planetary gearboxes can also be used in the production of heavy machine elements. There are many benefits of a planetary gearbox, including its compactness and low mass inertia. The main advantage of a planetary gearbox is its ability to distribute torque. Compared to a normal gearbox, planetary gearboxes can provide torque that is nearly three times higher than its conventional counterpart.
The three main types of planetary gears are the single-stage, compound, and multi-stage. The general concept of a planetary gear is referred to as a compound planetary gear. This means that planetary gears are made up of one of these three basic structures: a meshed-planet structure, a shaft, and a multi-stage structure. This type of gear has multiple stages and is particularly useful for fast-dynamic laser cutting machines.
planetarygearbox

Design

A planetary gearbox is similar to a car’s transmission. All of its gears must have a certain number of teeth and be spaced equally apart. The teeth of a planet must mesh with the gears of the ring and sun to be functional. The number of teeth needed will depend on the number of planets and their spacing. This equation is a good starting point for designing a gearbox.
The dynamic properties of planetary gears are investigated using a parametric model. The stiffness of the mesh changes as the number of gear tooth pairs in contact varies during the gear rotation. Small disturbances in design realizations cause nonlinear dynamics, which results in noise and vibrations in the gear transmission. A mathematical system describing this process is developed using the basic principles of analytical mechanics. This mathematical model can be used to optimize any planetary gear.
This analysis assumes that the sun gear and planet gears have the same design modulus, which is a fundamental requirement of any mechanical gear. In reality, the ratio of these two gears is 24/16 versus -3/2. This means that a planetary gearbox’s output torque is 41.1 times the input torque. Considering this factor, we can make an accurate estimate of the total torque. The planetary gears are mounted face-to-face and connected to an electric motor.
A planetary gear set has to have a certain number of teeth that are odd or even. One way to overcome this issue is to double the number of teeth on the sun gear and the annulus gear. This will also solve irregularities. Another way to design a planetary gear set is to use the appropriate diametral pitch and module. There are many planetary gear sets available on the market, so it pays to understand the differences.

Lubrication

Lubrication for Planetary Gearboxes is important for the smooth functioning of the gear. Planetary gears are subjected to high levels of friction and heat, so they require regular lubrication. The gear housing is designed to dissipate heat away from the gear, but heat can still enter the gear, which can result in a poor lubrication condition. The best lubrication solution is synthetic oil, and the gear should be refilled with a minimum of 30 percent oil.
When lubricating a planetary gearbox, it is important to note that hydraulic oil is not suitable for planetary gearboxes, which cost over $1500. Hydraulic oil does not have the same viscosity and behavior with temperature fluctuations, making it less effective. The planetary gearbox may also overheat if a hose is not provided for case draining. A case drain hose is essential to prevent this from happening, because hot oil can cause overheating of the gearbox and damage to the gears.
Oil delivery conduits are positioned between each pair of planet gears. Each oil delivery conduit directs fresh oil toward the sun gear and the planet gear. The oil then disperses and exits from the gear train with considerable tangential velocity. The oil is redirected into a collection channel (56). The preferred embodiment uses herringbone gears, which pump oil axially outward into the channels.
The best way to choose the right type of lubrication is to consider its viscosity. Too high a viscosity will prevent the lubricant from flowing properly, which will cause metal-to-metal contact. The oil must also be compatible with the gearbox temperature. A suitable viscosity will increase the efficiency of the gearbox and prevent downtime. A reliable gearbox will ultimately result in higher profits and fewer costs.
planetarygearbox

Applications

This report examines the Industrial Planetary Gearbox Market and its current trends. It identifies the pre and post-COVID-19 effects of the industry. It outlines the advantages and disadvantages of the industrial planetary gearbox market. The report also explains the diverse financing resources and business models of the market. It includes the key players in the industry. Hence, it is essential to read this report carefully.
The report includes analysis and forecasts of the global market for planetary gearbox. It includes the product introductions, key business factors, regional and type segments, and end-users. It covers the sales and revenue of the market for each application field. The report also includes the regional and country-level market data. It also focuses on the market share of the key companies operating in the industry. It covers the competitive scenario in the global planetary gearbox market.
Another popular application for planetary gearboxes is in the toy industry. It is possible to design toys that look stunning with planetary gear systems. In addition to toys, clock makers also benefit from the planetary arrangement. In addition to producing a good-looking clock, this gearbox can reduce inertia and improve its efficiency. The planetary gearbox is easy to maintain, which makes it a good choice for clock applications.
In addition to traditional gear reductions, planetary gears are also used for 3D printing. Their huge gear ratio makes 3D printing easier. Furthermore, planetary gears are used to drive stepper motors, which turn much faster and produce a desired output. There are numerous industrial uses for planetary gearboxes. This article has explored a few of the most common ones. And don’t forget to explore their uses.

China High Torque Helical Gear 400W Motor Planetary Gearbox custom planetary gearbox
editor by czh 2023-01-26

China 12VDC Motor 22mm High Torque Planetary Gearbox cyclo planetary gearbox

Item Description

We are a manufacturing facility specialised in metallic areas components & steel gear motor.
We solutions with ODM/OEM gearbox design and improvement , gearmotors manufacture.
A planetary gearbox is a gearbox with the input shaft and output shaft aligned it gives substantial torque transmission with great stiffness and low sounds , in a a lot more compact foot print than other gearbox sorts . It can offer a lot of speed reduction and torque in a tiny deal with the mounted axis .
A planetary equipment established is made up of 3 sorts of gears , a solar gear , earth gears and a ring gear . The solar gear at high speed is positioned at the middle of the gears , and transmits torque to the world gears which are usually mounted on the moveable carrier .The earth gears all around the central axis rotation ,mesh with the solar gear and an outer ring gear . As all the earth carriers turns , it provides minimal-pace, higher-torque output .
Description:
Merchandise Title : 22mm Pace reducer / Gearmotor / planetary gearbox with brushed / brushless electric 12V-24V motors
Gearbox Variety: Planetary
Material: Metallic
Gear Ratio : 5:1 , 10:1 , twenty:1 , 25:1 , 30:1 , forty:1 , fifty:1 , 60:1 ,70:1…100:1 , one hundred fifty:1… optional
Gearbox diameter : 6mm , 8mm,10mm , 12mm , 16mm , 22mm , 24mm , 32mm , 36mm,38mm , 42mm ……
3V ,9V , 12V ,24V obtainable .

Planetary Gearbox advantages:

Provides higher torque at sluggish speeds .
The shafts are made up of hardened and tempered alloy metal .
Sun gears ,earth gears and ring gears are produced of powder metallurgy and sintering metal .
Reduced noise levels.
Good top quality taper roller bearings for enter and output shafts .High efficiency .
Enhanced repeatability . Its Its higher speed radial and axial load offers dependability and robustness, reducing the misalignment of the equipment. In addition, uniform transmission and lower vibrations at distinct loads provide a ideal repeatability.
Best precision: Most rotating angular balance increases the precision and trustworthiness of the motion.
Decrease noise level due to the fact there is more floor make contact with. Rolling is a lot softer and jumps are almost nonexistent.
Better longevity: Due to its torsional rigidity and better rolling. To improve this attribute, your bearings aid decrease the losses that would happen by rubbing the shaft on the box right. Thus, increased effectiveness of the gear and a much smoother procedure is achieved.
Increased torque transmission: With far more teeth in speak to, the mechanism is CZPT to transmit and withstand far more torque. In addition, it does it in a much more uniform fashion.
Extremely great ranges of efficiency: Planetary reducers provide increased performance and thanks to its design and inside structure losses are minimized during their operate. In simple fact, these days, this sort of drive mechanisms are people that offer increased performance.
Optimum flexibility: Its mechanism is contained in a cylindrical gearbox, which can be installed in virtually any area

Geared Motor Software:
conditioning damper actuator,retractable rearview mirror,Vehicle tail gate electric putter,auto drinking water pump,vehicle antenna, door lock actuator, electric drill,check, window curtain,coffee equipment, tooth brush,stitching devices.

Software:
car antenna,Auto tail gate electrical putter,car water pump, door lock actuator, automatic cruise handle, window curtain, vacuum cleaner, camera, electric shaver, sewing , sweeper robot , coffee equipment,precision equipment,check,automatic vending machine,Health care cleansing pump, ride-on toy.

PM method for custom metallic planetary gearbox , geared motors .
The P/M process is an cost-effective, environmentally cleanse, high manufacturing approach for producing areas just to or shut to closing dimensions. With small or no machining functions required.
At present, areas with a complex shape, limited-dimensional tolerances, managed density and homes can be produced by powder metallurgy approaches. A technological approach of powder metallurgy ensures substantial versatility in the variety of physiochemical houses and other needs, such as:

Creation of structural components with intricate styles .
Controlled porosity .
Higher mechanical strength and resistance to vibrations .
Managed properties.
Large mechanical power and resistance to vibrations.
Higher producing precision and great floor top quality
Large quantity of manufacturing sequence .
Very good tolerances .

Customized metal parts

Workshop

US $2.5
/ Piece
| 2,000 Pieces

(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Three-Step

###

Samples:	US$ 2/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

US $2.5
/ Piece
| 2,000 Pieces

(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Three-Step

###

Samples:	US$ 2/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

How to Select a Planetary Gearbox for Your Applications

You can select the most suitable Planetary Gearbox for your applications after carefully checking the various features. You should also consider secondary features like noise level, corrosion resistance, construction, price, delivery time and service. You should also check if the constructor is available across the world, because some constructors operate faster than others. Some constructors even respond to your requests on the same day, while others deliver each planetary gearbox even if they are out of stock.
planetarygearbox

CZPT gearbox

An CZPT planetary gearbox is a high-quality, compact, and lightweight gearbox that distributes loads over several gears. The planetary gearbox has a polymer case that ensures quiet operation. The company is committed to the circular economy, investing in chemical recycling and promoting the use of recycled materials wherever possible. For more information, visit CZPT’s website or contact an CZPT expert today.
A planetary gearbox contains a sun gear, which is known as the input gear. The other gears are called planets, and these are mounted on a carrier, which is connected to an output shaft. A planetary gearbox is characterized by its high reduction ratios, energy savings, and compact design. It offers superior durability and trouble-free service. Whether you need a large or small planetary gearbox, you can find one to suit your needs.
The Standard series planetary gearboxes are a cost-effective alternative to premium series gearboxes. These gearboxes are suitable for applications requiring only mild backlash or with low IP65 protection. ABB positioners feature seven different gear unit variants, allowing for standardized mounting and stranded wire connections. The drygear(r) strain wave gear has a stranded wire connector and is available with a three-year warranty.
A planetary gearbox can be used for various applications, from lifting goods to loading and unloading products in a factory. The company has a wide product range for different applications, including plastic machinery and machine tools, pick-and-place robots, mill drives, and wind turbines. It can also be used to operate robot gripper systems. Its high-quality planetary gears are designed to last for many years, making it an ideal solution for many industries.

CZPT

A planetary gearbox is an essential component of many transport systems. These devices work by aligning the output and input shafts. The Reggiana planetary gearbox 2000 series includes bevel stages and linear variants. The company offers modularity and flexibility with output configurations in ten different gear sizes. Each planetary gearbox can also be customized to meet the specific needs of a specific application.
CZPT is the Australian branch of CZPT, a leading global manufacturer of planetary gearboxes. CZPT is located in Carrum Downs, south east of Melbourne, and is one of the leading suppliers of planetary reduction gears, hydraulic failsafe brakes, and wheel drives. The company aims to provide high-quality, durable products that can be used in a variety of applications.
A CZPT Plus Series Gear is designed to maximize flexibility in a variety of applications. The gearbox’s modular design allows for endless scalability. The CZPT Plus Series Gear is commonly used in mining operations, and is known for its raw output capabilities and low maintenance design. It is made with high-quality materials, and it is also available in multiple sizes for customized applications.
The multi-stage planetary gearbox can combine individual ratios to increase the overall multiplicative factor. The planetary gears may also be combined to increase the transmittable torque. The output shaft and drive shaft may rotate in opposite directions, or they can be fixed so the gearbox can function in either direction. If the ring gear is fixed, planetary gearboxes can be realized as multi-stage.
planetarygearbox

CZPT

The CZPT Planetary Gearbox is the perfect combination of compact size and high efficiency in power transmission. The compact design allows this gearbox to run silently while still delivering high power density and transmission efficiency. The CZPT Planetary Gearbox has several advantages. Unlike conventional planetary gearboxes, CZPT’s planetary gearbox features high power density, low torque, and optimum transmission efficiency.
CZPT’s products have been used in a variety of applications for many years, proving their reliability and quality. These products are renowned in the world for their reliability and quality. CZPT’s planetary gearboxes are backed by a five-year warranty. These features help customers choose a planetary gearbox that meets their needs and stays in top shape for years to come. But how do you test a planetary gearbox?
Figure 17 shows the response of a planetary gearbox to vibration. The maximum displacement in xg direction at a 50% crack level is shown by the dashed line. The signal in xg direction is called the xsignal. Moreover, the CZPT Planetary Gearbox’s vibration response is highly sensitive to the location of the bearings. For this reason, dynamic modeling of a planetary gearbox should consider bearing clearance.
CZPT’s hollow cup motor drive system features high reliability and low power consumption. The gearbox is compatible with industries with high quality standards, as there is no cogging torque. Its compact size and low electromagnetic noise make it ideal for a variety of applications. For industries with high product quality requirements, the CZPT Hollow Cup Motor Drive System is an excellent choice. It is also designed for vertical installation. You can even buy multiple CZPT products to meet your specific needs.

CZPT

With its PL series planetary gearboxes, CZPT has expanded its product portfolio to include more types of drive solutions. CZPT is one of the few companies to have won the Schneider Electric Supplier Award for Quality. In addition, its high-quality planetary gearboxes are highly customizable, allowing designers to customize each gearbox for the application at hand. Whether it is a geared pump or a stepper motor, CZPT’s PLE planetary gearboxes are built to meet the exact specifications of the application at hand.
The flange-mounted version of the planetary gearbox is comparable to its planetary counterpart. Using a flange-mounted planetary gearbox allows for a smaller, more compact design. This model also features a large-diameter output shaft, which helps achieve a higher level of torsional stiffness. This makes CZPT flange gearboxes particularly useful for applications where the direction of motion can change frequently. These gearboxes can be used with a wide variety of belts.
The PLQE 60-mm gearbox is used in Outrider’s single-stage design. Its gear ratio is 5:1, while its dual-stage version has a 15:1 gear ratio. Both gearboxes have identical mounting configurations, but the two-stage version is slightly longer.
The PLN series of planetary gearheads from CZPT are the standard for high-precision applications. They’re compatible with all major motor brands and sizes, and the company’s adapter kits are available to fit almost any motor. This makes CZPT gearheads one of the easiest to integrate into a complex machine. They’re also extremely easy to install, with the same torque as their corresponding spur gears.
planetarygearbox

CZPT’s

If you are looking for an efficient solution for screw press applications, consider using CZPT’s 300M Planetary Gearbox. It has high axial and radial load capacities, compact design, high torque output, and torque arm. The 300M planetary gearbox is compatible with a variety of screw presses, including hydraulic press systems and digester systems. Its Torque control and direct coupling feature makes it easy to install.
CZPT’s small planetary gearboxes have an output torque of 20:1 from individual ratios of 5:1 and 4:1. They run silently and deliver maximum transmission efficiency. The planetary gears are mounted on a ring that is fixed around the center sun gear. The ring acts as an output torque converter for the next planet stage. This planetary gearbox has multiple stages and a maximum ratio of 20:1 can be created from individual ratios of 5:1 and 4:1.
CZPT Motor is an innovator in the design and manufacture of miniature motors for industrial robots. Its offerings include brushless DC and brushed DC motors, as well as planetary gearboxes, encoders, and brakes. CZPT’s products have a variety of uses in robotics, intelligent appliances, medical equipment, communication, and industrial automation. The company is also committed to providing custom designs based on customer specifications.
Another advantage of a planetary gearbox is its high power transmission efficiency. It is capable of approximately 3% per stage, allowing it to transmit more torque than a conventional single-stage gearbox. Planetary gearboxes are also compact and have a high torque-to-weight ratio. CZPT’s Planetary Gearbox is the best choice for many applications. This gearbox offers the highest efficiency and is ideal for small-scale production.

China 12VDC Motor 22mm High Torque Planetary Gearbox cyclo planetary gearbox
editor by czh 2023-01-24

China Cycloidal Gearbox Speed Reducer Cyclo Drive Gear Motor Small Planetary Gearbox Gear Speed Planetary Reduction Stainless Steel Single Stage Epicyclic High Torque planetary gearbox cost

Item Description

Cycloidal gearbox velocity reducer cyclo push gear motor tiny planetary gearbox equipment velocity planetary reduction stainless metal solitary phase epicyclic higher torque

US $10-99
/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:	Three-Ring
Hardness:	Hardened Tooth Surface
Installation:	Torque Arm Type
Step:	Stepless

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

US $10-99
/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:	Three-Ring
Hardness:	Hardened Tooth Surface
Installation:	Torque Arm Type
Step:	Stepless

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

Planetary Gearbox Components

The basic components of a planetary gearset are an input, output, and stationary position. Different types of planetary gearboxes will have different output ratios and torques. A leading company for planetary gearbox design, CZPT, provides the necessary components. These components can vary in both male and female shafts and come with a variety of modular options. Here are a few things to consider about each component.

CFHK Series

The CFHK Series is a multistage planetary gearbox that contains multiple planetary gears. The multiple teeth of each planetary gear mesh simultaneously during operation to increase the transmittable torque. The gears are case hardened and ground, and the ratios of the planetary gears are integers. They were first functionally described by Leonardo da Vinci in 1490. Today, the CFHK Series is a favorite among automotive engineers and manufacturers.
The CH Series offers high accuracy with a compact design and case hardened, hypoid, and helical gearing. These gearboxes are also available in the CFXR series, with low backlash and friction. These planetary gearboxes are designed to provide high torque and high precision in a variety of applications. In addition, the CFXR series features 100% helical gearing and low backlash.
The CFHK Series features a sun gear that drives the next stage. These gears can be put in series or serially in the same housing. In some cases, the output shaft of the first stage becomes the input shaft of the second stage. In addition, ring gears are also used as structural parts of smaller gearboxes. An example of a planetary gearbox is the pencil sharpener mechanism. The pencil is placed on an axis that is set on a sun gear. The sun gear drives the next planet stage.
A planetary gear unit’s gear ratio is determined by the number of teeth in the sun gear and ring gear. The smaller the sun gear, the smaller the ratio between the sun gear and planet gears. The largest gear ratio in a planetary gear unit is 10:1. A higher number of teeth increases the transmission ratio. In order to maximize torque, the planetary gears must be rearranged. A smaller sun gear will have higher torque than a large ring gear.
planetarygearbox

CFX Series

The HPN Harmonic Planetary(r) Series planetary gearboxes offer a low-cost solution with high-performance and high-reliability. This modular design is easy to install and requires very little maintenance. Its planetary design and full complement of needle rollers allow for extended life and quiet operation. In addition, the HPN Harmonic Planetary(r) Series is available in a range of sizes.
The compact size and high-speed design of planetary gearboxes results in excellent heat dissipation. However, high-speed or sustained performance applications may require lubricants. A planetary gearbox will have smaller minimum steps to minimize noise and vibration. Planetary gears will give you the highest level of efficiency while minimizing noise. As a result, they can provide high-quality 3D prints.
A planetary gear train is composed of a ring gear and planet gears, each supported by a carrier. A ring gear is pink, while the sun gear is red. The sun gear and carrier rotate around each other at a 45-degree angle. This is also known as an epicyclic gear. Planetary gearboxes are often found in space-constrained applications. The CFX Series features a compact design and excellent performance.
The CFX Series features a robust design that is easy to install. Its compact size makes installation of planetary gearboxes easier and faster. They are available in three different configurations for continuous, intermittent, and counter-clockwise operation. The CFX Series offers the perfect solution for your accelerating needs. They’re a great solution for any automotive or industrial application. You can easily configure the CFX Series to meet your specific requirements.

CAP Series

The Candy Controls CAP Series is a new generation of compact, precision planetary gearboxes that combine high torques with low backlash and exceptional wear resistance. This rotary flange planetary gearbox is ideal for a variety of industrial, mining and marine applications. Its modular construction enables users to easily mount different stages, hydraulic or electric motors, and different types of gears. Its CPH Series features an extremely rigid alloy steel housing, carburized gears, and induction hardened gears.
The CAP Series utilizes multiple planetary gears for high torque transmission. The number of planetary gears is not fixed, but most planetary gearboxes utilize at least three. The larger the number of planetary gears, the higher the transmittable torque. A planetary gearbox is composed of multiple planetary gears with a meshing action that occurs simultaneously during operation. The result is a higher efficiency and a smoother, quieter operation than a conventional gearbox.
The VersaPlanetary range features modular design for easy installation. This system includes mounting plates for typical FIRST (r) Robotics Competition motors. The mounting plates are designed to fit each motor. These planetary gearboxes are compatible with various types of motors, from small electric motors to large, heavy duty ones. They are also compatible with a variety of mounting systems, including CIM motors.
planetarygearbox

CAPK Series

The CZPT APK Series is a high precision, rotary flange style planetary gearbox. Its case hardened and ground gears are designed to provide excellent wear resistance, low backlash, and excellent precision. The CAPK Series offers high axial and moment load capacities in a compact housing. CZPT is the world leader in the production of planetary gearboxes. The CAPK Series features an array of high-quality, innovative features.
CZPT SMART Lubrication technology is used to keep the gears well-lubricated and reduce noise and vibration. The planetary gearbox’s 3-gear design is ideal for DIY CNC robotics. This series has a long history of quality, and CZPT uses only the best components. The CZPT 3:1 High Precision Planetary Gearbox is an excellent choice for CNC Robotics and other applications.
A multi-stage planetary gearbox combines individual ratios for a greater number of ratios. Additional planetary gears increase the transmittable torque. The direction of the output and drive shaft are always identical. The CAPK Series features a high-quality, durable construction. They are made from stainless steel and offer a long-term warranty. They are the best choice for industrial and commercial applications. While planetary gears are more expensive, they are highly efficient.

CFH Series

The Candy CFH Series planetary gearboxes offer the benefits of a modular design and a low backlash. They offer a variety of size options and excellent durability. This planetary gearbox is compact and wear resistant. The CFH Series planetary gearbox has a carburized, induction hardened gears and a rigid alloy steel housing. Its low backlash and precision make it an excellent choice for industrial applications.
The CFH Series planetary gearbox is a highly efficient, high-speed helical gear. The compact design of this gearbox results in high heat dissipation and low mass inertia. Planet carrier bearings experience significant lateral forces from the transmission of torque. As a result, radial and axial forces oppose each other. The result is that the torque is distributed over three gears, reducing noise, vibration, and wear.
The planetary gearbox has three main components: a sun gear (also known as the input gear), a ring gear, and two planet gears. These are connected by a carrier that rotates about a 45-degree clockwise axis. The CFH Series of gears is available in triple and double stages. They can also be used in electric motors. As a result, the CFH Series is highly versatile.
The CFH Series of planetary gearboxes can be found in all kinds of applications, including automotive transmissions. Their compact design and high-performance performance make them a popular choice for space-constrained applications. This gearbox has several benefits and is a great alternative to a conventional helical gearbox. These gearboxes are highly effective for reducing torque and speed, and are compact enough to fit in most applications.
planetarygearbox

CZPT

If you need a high-quality planetary gearbox, the CZPT Planetary Series is the right choice. This Italian company designs and manufactures gearboxes in its San Polo d’Enza, Italy, facility with 11 branch offices and three production facilities. The company is attempting to replicate the success of the Italian Super Car industry, which has gained global recognition. The company provides a range of gearboxes for use in heavy industry, agriculture, offshore, aerial and marine work.
With over 40 years of experience, CZPT manufactures a wide range of high-quality gearboxes. From bevel-helical units to Helical units, wheel gears and negative brakes, the company has been manufacturing quality components for many industries. CZPT is a trusted Australian distributor of CZPT gear components. The company is dedicated to providing the best planetary gears for every industry.
If your CZPT Planetary gearbox is malfunctioning, you can have it repaired quickly and easily. The company uses quality materials and a variety of sizes and output ratios to cater to the most demanding applications. In addition, you can customize your gearbox to suit your specific needs. CZPT Planetary Gearboxes are highly versatile and customizable, offering infinite scalability.

China Cycloidal Gearbox Speed Reducer Cyclo Drive Gear Motor Small Planetary Gearbox Gear Speed Planetary Reduction Stainless Steel Single Stage Epicyclic High Torque planetary gearbox cost
editor by czh 2022-12-30

China NEMA 17 High Torque Gear Stepper Reduction Geared Motor with Planetary Gearbox

Product Description

I.CH-Hybrid Stepper Planetary Gear Motor

• Manufacturer Part Number: HP421
• Motor Type: Planetary Gearbox Stepper Motor Bipolar 4 Wires 2 Phase
• Frame Size: 42x42mm Geared Stepper Motor Nema 17 Mounting
• Step Angle: 1.8deg
• Gearbox Efficiency: 66%—90%
• Application: Medical Equipment Motor
• HP421-1 42MM
• Stepper Angel: 1.8

Drawing:

Motor Electrical Specification:

Series Model	Step Angle ( o )	L (mm)	Rated Current (A)	Phase Resistance (Ω)	Phase Inductance (mH)	Holding Torque (N.cm)	Detent Torque (N.cm)	Lead Wire (NO.)	Motor Weight ( g)
HP421-01206	1.8	28	0.6	8	10	12	1.6	4	150
HP421-57117	1.8	34	1.7	1.2	1.8	28	1.6	4	220
HP421-04013	1.8	40	1.3	2.5	5.0	40	2.2	4	280
Other Motor Electrical Specification please refer to Hybrid Stepper Motor web

Gearbox Specification:

Ratio	3.71	5.18	14	19	27	51	71	100	139	189	264	369
Reducer Series	1		2			3				4
Length ( mm)	31.0		40.1			49.0				57.9
Allowable Torque (Kg.cm)	12		20			32				40
Instantaneous Torque (Kg.cm)	36		60			96				120
Efficiency (%)	90%		81%			73%				66%
Weight (g)	60		85			95				110
We can manufacture products according to customer’s requirements

About Us:

We specialized in researching, developing and servicing electric motors, gearbox and high precision gears with the small modules.

After years of development, we have an independent product design and R&D team, service team and professional quality control team.

What’s more, we have 2 joint ventures. One is located in HangZhou, which produces hybrid stepper motor, precious linear stepper motor, brushless DC motor, servo motor, stepper motor driver, brushless motor driver, encoder and brake.

Another 1 is located in HangZhou, which produces DC gear motor. The factory has dozens of CNC machines and high precision test equipment, implements the process management and automatic operation in most producing process.

We also have 2 cooperation factories. One is producing AC reversible synchronous motor and AC servo motor, the other 1 is producing linear permanent stepper motor, permanent stepper motors.

Customer’s Visit:

A Brief Overview of the Spur Gear and the Helical Planetary Gearbox

This article will provide a brief overview of the Spur gear and the helical planetary gearbox. To learn more about the advantages of these gearboxes, read on. Here are a few common uses for planetary gears. A planetary gearbox is used in many vehicles. Its efficiency makes it a popular choice for small engines. Here are 3 examples. Each has its benefits and drawbacks. Let’s explore each one.
planetarygearbox

helical planetary gearbox

In terms of price, the CZPT is an entry-level, highly reliable helical planetary gearbox. It is suitable for applications where space, weight, and torque reduction are of high concern. On the other hand, the X-Treme series is suitable for applications requiring high-acceleration, high-axial and radial loads, and high-speed performance. This article will discuss the benefits of each type of planetary gearbox.
A planetary gearbox’s traction-based design is a variation of the stepped-planet design. This variation relies on the compression of the elements of the stepped-planet design. The resulting design avoids restrictive assembly conditions and timing marks. Compared to conventional gearboxes, compound planetary gears have a greater transmission ratio, and they do so with an equal or smaller volume. For example, a 2:1 ratio compound planet would be used with a 50-ton ring gear, and the result would be the same as a 100-ton ring gear, but the planetary disks would be half the diameter.
The Helical planetary gearbox uses 3 components: an input, an output, and a stationary position. The basic model is highly efficient and transmits 97% of the input power. There are 3 main types of planetary gearboxes, each focusing on a different performance characteristic. The CZPT basic line is an excellent place to start your research into planetary gearboxes. In addition to its efficiency and versatility, this gearbox has a host of modular features.
The Helical planetary gearbox has multiple advantages. It is versatile, lightweight, and easy to maintain. Its structure combines a sun gear and a planet gear. Its teeth are arranged in a way that they mesh with each other and the sun gear. It can also be used for stationary applications. The sun gear holds the carrier stationary and rotates at the rate of -24/16 and -3/2, depending on the number of teeth on each gear.
A helical planetary gearbox can reduce noise. Its shape is also smaller, reducing the size of the system. The helical gears are generally quieter and run more smoothly. The zero helix-angle gears, in contrast, have smaller sizes and higher torque density. This is a benefit, but the latter also increases the life of the system and is less expensive. So, while the helical planetary gearbox has many advantages, the latter is recommended when space is limited.
The helical gearbox is more efficient than the spur gear, which is limited by its lack of axial load component. The helical gears, on the other hand, generate significant axial forces in the gear mesh. They also exhibit more sliding at the points of tooth contact, adding friction forces. As such, the Helical planetary gearbox is the preferred choice in servo applications. If you’re looking for a gearbox to reduce noise and improve efficiency, Helical planetary gearboxes are the right choice.
The main differences between the 2 types of planetary gears can be found in the design of the 2 outer rings. The outer ring is also called the sun gear. The 2 gears mesh together according to their own axes. The outer ring is the planetary gear’s carrier. Its weight is proportional to the portion of the ring that is stationary. The carrier sets the gaps between the 2 gears.
Helical gears have angled teeth and are ideal for applications with high loads. They are also extremely durable and can transfer a high load. A typical Helical gearbox has 2 pairs of teeth, and this ensures smooth transmission. In addition, the increased contact ratio leads to lower fluctuations in mesh stiffness, which means more load capacity. In terms of price, Helical planetary gears are the most affordable gearbox type.
The outer ring gear drives the inner ring gear and surrounding planetary parts. A wheel drive planetary gearbox may have as much as 332,000 N.m. torque. Another common type of planetary gearbox is wheel drive. It is similar to a hub, but the outer ring gear drives the wheels and the sun gear. They are often combined over a housing to maximize size. One-stage Helical gears can be used in bicycles, while a two-stage planetary gear system can handle up to 113,000 N.m. torque.
The design of a helical planetary geartrain is complicated. It must comply with several constraints. These constraints relate to the geometrical relationship of the planetary geartrains. This study of the possible design space of a Helical geartrain uses geometric layouts. The ring gear, sun, and ring gear have no effect on the ratio of the planetary transmission. Nonetheless, helical geartrains are a good choice for many applications.
planetarygearbox

Spur gear planetary gearbox

The combination of planetary gears and spur gears in a transmission system is called a planetary or spur gearbox. Both the planetary gear and spur gear have their own characteristics and are used in various kinds of vehicles. They work in a similar way, but are built differently. Here are some important differences between the 2 types of gears. Listed below are some of the most important differences between them:
Helical gears: As opposed to spur gears, helical gears generate significant axial forces in the gear mesh. They also feature greater sliding contact at the point of tooth contact. The helix angle of a gearbox is generally in the range of 15 to 30 degrees. The higher the helix angle, the more axial forces will be transmitted. The axial force in a helical gearbox is greater than that of a spur gear, which is the reason why helical gears are more efficient.
As you can see, the planetary gearhead has many variations and applications. However, you should take care in selecting the number of teeth for your planetary gear system. A five:1 spur gear drive ratio, for example, means that the sun gear needs to complete 5 revolutions for every output carrier revolution. To achieve this, you’ll want to select a sun gear with 24 teeth, or 5 mm for each revolution. You’ll need to know the metric units of the planetary gearhead for it to be compatible with different types of machines.
Another important feature of a planetary gearbox is that it doesn’t require all of the spur gears to rotate around the axis of the drive shaft. Instead, the spur gears’ internal teeth are fixed and the drive shaft is in the same direction as the output shaft. If you choose a planetary gearbox with fixed internal teeth, you’ll need to make sure that it has enough lubrication.
The other significant difference between a spur gear and a planetary gearbox is the pitch. A planetary gearbox has a high pitch diameter, while a spur gear has low pitch. A spur gear is able to handle higher torques, but isn’t as efficient. In addition, its higher torque capability is a big drawback. Its efficiency is similar to that of a spur gear, but it is much less noisy.
Another difference between planetary and spur gear motors is their cost. Planetary gear motors tend to be more expensive than spur gear motors. But spur gears are cheaper to produce, as the gears themselves are smaller and simpler. However, planetary gear motors are more efficient and powerful. They can handle lower torque applications. But each gear carries a fixed load, limiting their torque. A spur gear motor also has fewer internal frictions, so it is often suited for lower torque applications.
Another difference between spur gears and planetary gears is their orientation. Single spur gears are not coaxial gearboxes, so they’re not coaxial. On the other hand, a planetary gearbox is coaxial, meaning its input shaft is also coaxial. In addition to this, a planetary gearbox is made of 2 sets of gear wheels with the same orientation. This gives it the ability to achieve concentricity.
Another difference between spur gears and planetary gears is that a planetary gear has an integer number of teeth. This is important because each gear must mesh with a sun gear or a ring gear. Moreover, each planet must have a corresponding number of teeth. For each planet to mesh with the sun, the teeth must have a certain distance apart from the other. The spacing between planets also matters.
Besides the size, the planetary gear system is also known as epicyclic gearing. A planetary gear system has a sun gear in the center, which serves as the input gear. This gear has at least 3 driven gears. These gears engage with each other from the inside and form an internal spur gear design. These gear sets are highly durable and able to change ratios. If desired, a planetary gear train can be converted to another ratio, thereby enhancing its efficiency.
Another important difference between a spur gear and a planetary gearbox is the type of teeth. A spur gear has teeth that are parallel to the shaft, while a planetary gear has teeth that are angled. This type of gear is most suitable for low-speed applications, where torque is necessary to move the actuation object. Spur gears also produce noise and can damage gear teeth due to repeated collisions. A spur gear can also slip, preventing torque from reaching the actuation object.

China NEMA 17 High Torque Gear Stepper Reduction Geared Motor with Planetary Gearbox

China Professional NEMA23 Stepper Motor with Gearbox Small Size High Torque with Hot selling

Solution Description

Merchandise Description

Higher Precision Planetary Gear Stepper Motor

The high precision planetary equipment stepper motor is higher precision and minimal sound with precision metal teeth,can face up to better axial pressure and radial force. Greater concentricity, a lot more secure transmission. These motors are available in normal:
Nema 17(42*34, forty two*40)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:forty, 1:fifty,1:701:100.
Nema 23(fifty seven*55)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40
Nema 24(60*fifty five)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:forty
And 48 hours delivery, in stock .

Software:
Automation control, medical equipment, textile machinery, and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home. Products with low speed and inertia are often seen: electric curtains, electric shutters, etc

Merchandise Parameters

Planetary Gear Box Specification:

Detailed Photographs

Company Profile

ZheJiang UMot Engineering Co., Ltd. specializes in R&D and sales of stepper motors, servo motors, linear modules and associated movement handle merchandise, customizing and developing higher-quality motor goods for users with special wants about the world, and supplying general solutions for motion handle programs. Merchandise are exported to a lot more than thirty nations and locations including the United States, Germany, France, Italy, Russia, and Switzerland. The firm’s major products and system style have been commonly utilized in automation manage, precision devices, healthcare products, intelligent residence, 3D printing and many other fields.
Our company has been recognized as a CZPT business by pertinent departments, has a total top quality management program, has received ISO9001, CE, RoHs and other relevant certifications, and retains a variety of electrical patent certificates. “Concentration, Professionalism, Concentration” in the discipline of automation of motor R&D and technique control options is the firm’s enterprise function. “Be your most trusted associate” is the firm’s support philosophy. We have always been aiming to “make very first-class goods with expert engineering”, maintain speed with the occasions, innovate continually, and give a lot more end users with better merchandise and solutions.

FAQ

one. Delivery method:
1)Intercontinental Categorical supply DHL&FEDEX &UPS&TNT& 7-10days
2)Transport by air 7-ten days
3)transport by sea, shipping time relies upon on the vacation spot port.

two. Technical Support:
We can give you with skilled complex assistance. And our merchandise top quality assure is 6 months. Also, we accept products tailored.

3. Why ought to you get from us, not from other suppliers?
Specialist a single-to-1 motor custom-made. The world’s big organization of choice for substantial-top quality suppliers. ISO9001:2008 top quality management program certification, via the CE, ROHS certification.

4. How to pick models?
Prior to purchasing, you should contact us to affirm product No. and technical specs to avoid any misunderstanding.

5. Are you a manufacturing unit?
Of course, we are a factory, and we generate stepper motor/driver, Servo motor/driver.

How to Decide on a Planetary Gearbox for Your Applications

You can decide on the most ideal Planetary Gearbox for your applications soon after carefully examining the a variety of characteristics. You need to also think about secondary features like sound amount, corrosion resistance, construction, price, shipping time and services. You should also verify if the constructor is available throughout the entire world, because some constructors function faster than other individuals. Some constructors even reply to your requests on the exact same working day, even though other folks produce each and every planetary gearbox even if they are out of inventory.
planetarygearbox

CZPT gearbox

An CZPT planetary gearbox is a higher-top quality, compact, and light-weight gearbox that distributes loads in excess of many gears. The planetary gearbox has a polymer scenario that makes certain peaceful procedure. The company is dedicated to the round economy, investing in chemical recycling and selling the use of recycled resources where ever achievable. For far more data, visit CZPT’s internet site or make contact with an CZPT specialist right now.
A planetary gearbox is made up of a sun gear, which is acknowledged as the input equipment. The other gears are known as planets, and these are mounted on a carrier, which is linked to an output shaft. A planetary gearbox is characterised by its higher reduction ratios, power cost savings, and compact style. It provides exceptional toughness and trouble-free service. Whether or not you need a massive or modest planetary gearbox, you can discover one particular to fit your requirements.
The Standard collection planetary gearboxes are a expense-powerful alternative to top quality sequence gearboxes. These gearboxes are suited for applications requiring only gentle backlash or with minimal IP65 safety. ABB positioners characteristic seven diverse equipment device variants, allowing for standardized mounting and stranded wire connections. The drygear(r) strain wave gear has a stranded wire connector and is offered with a a few-yr guarantee.
A planetary gearbox can be utilized for numerous purposes, from lifting merchandise to loading and unloading products in a manufacturing facility. The company has a wide solution selection for diverse apps, like plastic machinery and device equipment, select-and-area robots, mill drives, and wind turbines. It can also be used to operate robotic gripper methods. Its high-quality planetary gears are developed to previous for a lot of many years, creating it an excellent answer for several industries.

CZPT

A planetary gearbox is an essential element of many transportation techniques. These products operate by aligning the output and input shafts. The Reggiana planetary gearbox 2000 collection includes bevel levels and linear variants. The firm gives modularity and flexibility with output configurations in 10 distinct equipment sizes. Each and every planetary gearbox can also be customized to meet up with the certain needs of a specific software.
CZPT is the Australian branch of CZPT, a foremost international manufacturer of planetary gearboxes. CZPT is situated in Carrum Downs, south east of Melbourne, and is one of the major suppliers of planetary reduction gears, hydraulic failsafe brakes, and wheel drives. The organization aims to provide higher-quality, sturdy goods that can be utilised in a selection of purposes.
A CZPT Additionally Sequence Gear is created to improve versatility in a assortment of applications. The gearbox’s modular design allows for endless scalability. The CZPT Additionally Sequence Equipment is typically employed in mining functions, and is acknowledged for its uncooked output capabilities and reduced maintenance design. It is manufactured with high-good quality components, and it is also accessible in several sizes for customized programs.
The multi-stage planetary gearbox can combine personal ratios to boost the general multiplicative factor. The planetary gears may also be combined to enhance the transmittable torque. The output shaft and generate shaft might rotate in reverse directions, or they can be set so the gearbox can purpose in possibly direction. If the ring gear is fastened, planetary gearboxes can be recognized as multi-phase.
planetarygearbox

CZPT

The CZPT Planetary Gearbox is the best mixture of compact dimensions and high efficiency in electrical power transmission. The compact design and style enables this gearbox to run silently although even now providing higher electrical power density and transmission efficiency. The CZPT Planetary Gearbox has several advantages. Not like conventional planetary gearboxes, CZPT’s planetary gearbox features substantial electrical power density, lower torque, and ideal transmission effectiveness.
CZPT’s products have been used in a variety of applications for numerous many years, proving their trustworthiness and quality. These goods are renowned in the entire world for their dependability and good quality. CZPT’s planetary gearboxes are backed by a five-yr warranty. These functions help customers choose a planetary gearbox that fulfills their needs and stays in prime condition for several years to occur. But how do you take a look at a planetary gearbox?
Determine 17 displays the reaction of a planetary gearbox to vibration. The greatest displacement in xg route at a 50% crack amount is revealed by the dashed line. The sign in xg course is known as the xsignal. Furthermore, the CZPT Planetary Gearbox’s vibration response is highly delicate to the area of the bearings. For this cause, dynamic modeling of a planetary gearbox ought to consider bearing clearance.
CZPT’s hollow cup motor generate method features substantial dependability and reduced energy usage. The gearbox is appropriate with industries with high quality expectations, as there is no cogging torque. Its compact dimensions and low electromagnetic noise make it best for a variety of purposes. For industries with higher item quality requirements, the CZPT Hollow Cup Motor Travel Technique is an excellent choice. It is also made for vertical set up. You can even get several CZPT products to meet up with your particular demands.

CZPT

With its PL collection planetary gearboxes, CZPT has expanded its solution portfolio to consist of a lot more types of generate remedies. CZPT is one particular of the few companies to have received the Schneider Electric powered Provider Award for Top quality. In addition, its substantial-top quality planetary gearboxes are highly customizable, permitting designers to personalize each and every gearbox for the application at hand. Whether it is a geared pump or a stepper motor, CZPT’s PLE planetary gearboxes are created to satisfy the exact specifications of the software at hand.
The flange-mounted edition of the planetary gearbox is comparable to its planetary counterpart. Using a flange-mounted planetary gearbox allows for a smaller sized, a lot more compact design. This model also features a huge-diameter output shaft, which helps accomplish a larger stage of torsional stiffness. This tends to make CZPT flange gearboxes especially useful for apps where the direction of movement can change frequently. These gearboxes can be utilised with a broad assortment of belts.
The PLQE 60-mm gearbox is utilized in Outrider’s one-stage design and style. Its gear ratio is 5:1, although its twin-phase edition has a 15:1 gear ratio. Each gearboxes have identical mounting configurations, but the two-phase variation is slightly longer.
The PLN series of planetary gearheads from CZPT are the common for large-precision purposes. They are compatible with all major motor brands and sizes, and the company’s adapter kits are offered to in shape practically any motor. This helps make CZPT gearheads one particular of the easiest to integrate into a complicated equipment. They’re also really simple to set up, with the same torque as their corresponding spur gears.
planetarygearbox

CZPT’s

If you are looking for an productive answer for screw push programs, contemplate using CZPT’s 300M Planetary Gearbox. It has higher axial and radial load capacities, compact design, higher torque output, and torque arm. The 300M planetary gearbox is compatible with a selection of screw presses, like hydraulic push techniques and digester systems. Its Torque handle and direct coupling attribute tends to make it straightforward to set up.
CZPT’s tiny planetary gearboxes have an output torque of twenty:1 from personal ratios of 5:1 and 4:1. They run silently and supply greatest transmission performance. The planetary gears are mounted on a ring that is fixed about the heart sun equipment. The ring functions as an output torque converter for the following world stage. This planetary gearbox has a number of stages and a greatest ratio of twenty:1 can be developed from individual ratios of 5:1 and 4:1.
CZPT Motor is an innovator in the style and manufacture of miniature motors for industrial robots. Its choices incorporate brushless DC and brushed DC motors, as effectively as planetary gearboxes, encoders, and brakes. CZPT’s items have a variety of makes use of in robotics, clever appliances, medical gear, conversation, and industrial automation. The firm is also dedicated to delivering custom made types primarily based on client requirements.
Yet another gain of a planetary gearbox is its large energy transmission performance. It is able of approximately 3% per stage, making it possible for it to transmit a lot more torque than a traditional one-stage gearbox. Planetary gearboxes are also compact and have a high torque-to-weight ratio. CZPT’s Planetary Gearbox is the best option for a lot of applications. This gearbox delivers the optimum performance and is excellent for small-scale production.

China Professional NEMA23 Stepper Motor with Gearbox Small Size High Torque with Hot selling

China Standard 22mm High Torque 12V 24V DC Motor with Miniature Planetary Gearbox near me factory

Product Description

Note:

The requirements can be created in accordance to the customer’s requirements!

Application:

Electric powered Drill, Screwdriver, Scanners, Printers, Vending Machine, Window Curtain, Espresso Equipment, Electric powered Lock, and so on.

Parameter:

About Us:

We specialised in exploring, establishing, and servicing electrical motors, gearbox, and large precision gears with the little module. Soon after several years of improvement, we have an impartial item design and style and R&D staff, service staff, and a professional good quality handle staff. To recognize our support concept greater, give large-top quality goods and outstanding provider, we have been dedicated to the main capability and training. We have a holding manufacturing facility in HangZhou, which generates substantial precision modest mildew gears, equipment shaft, gearbox, and planetary gearbox assembling.

Function-flow:

Certification:
RoHS, CE, and a lot more…

Services:

ODM & OEM
Gearbox design and growth

Package&Ship:

Carton, pallet, or what you want
The delivery time is about 30-forty five times.

Customer’s Browsing:

FAQ:

1. Can you personalized gearbox?
Indeed.

two. DO you provide the sample?
Of course.

three. Do you supply technological assist?
Indeed

four. Do you have a factory?
Indeed, we are a expert manufacturer.

5. Can I occur to your company to check out?
Yes

Planetary Gearbox Positive aspects and Down sides

A planetary gearbox is a variety of mechanical push with a one output shaft. They are suitable for each clockwise and counterclockwise rotations, have considerably less inertia, and operate at increased speeds. Below are some benefits and down sides of this variety of gearbox. Allow us see what these benefits are and why you ought to use them in your applications. Outlined beneath are some of the positive aspects of planetary gearboxes.
planetarygearbox

Ideal for counterclockwise and clockwise rotation

If you want to teach kids about the clock arms, you can buy some methods for counterclockwise and asymmetrical rotation. These methods contain worksheets for determining degrees of rotation, composing policies for rotation, and visible processing. You can also use these sources to educate angles. For instance, the translation of styles action pack assists young children discover about the rotation of geometric shapes. Equally, the visual perception exercise sheet helps youngsters understand how to process info visually.
Different studies have been accomplished to realize the anatomical substrate of rotations. In a modern examine, CZPT et al. compared the position of the transitional zone electrocardiographically and anatomically. The authors located that the transitional zone was regular in nine of 33 topics, indicating that rotation is not a indicator of disease. Similarly, a counterclockwise rotation may be caused by a genetic or environmental aspect.
The main idea data must be created to perform in both clockwise and counterclockwise rotation. Counterclockwise rotation calls for a different commencing position than a clockwise rotation. In North The united states, star-delta starting is utilised. In the two circumstances, the figure is rotated about its level. Counterclockwise rotation, on the other hand, is completed in the reverse direction. In addition, it is achievable to develop counterclockwise rotation using the very same gimbal.
Even with its name, both clockwise and counterclockwise rotation calls for a specific amount of power to rotate. When rotating clockwise, the object faces upwards. Counterclockwise rotation, on the other hand, starts off from the top situation and heads to the proper. If rotating in the reverse path, the object turns counterclockwise, and vice versa. The clockwise movement, in contrast, is the reverse of counterclockwise rotation.

Has less inertia

The principal difference amongst a planetary gearbox and a standard pinion-and-gear reducer is the ratio. A planetary gearbox will produce considerably less inertia, which is an essential gain since it will decrease torque and strength requirements. The ratio of the planetary gearbox to its set axis counterpart is a element of 3. A planetary gearbox has scaled-down gears than a conventional planetary, so its inertia is proportional to the quantity of planets.
Planetary gears are significantly less inertia than spur gears, and they share the load across numerous gear enamel. This signifies that they will have minimal backlash, and this is important for purposes with higher commence-stop cycles and repeated rotational direction modifications. Yet another advantage is the higher stiffness. A planetary gearbox will have significantly less backlash than a spur gearbox, which indicates that it will be far more trustworthy.
A planetary gearbox can use either spur or helical gears. The former provides higher torque rankings while the latter has significantly less sound and stiffness. Both sorts of gears are useful in motorsports, aerospace, truck transmissions, and electrical power technology units. They require a lot more assembly time than a typical parallel shaft equipment, but the PD collection is the more successful substitute. PD sequence planetary gears are suited for many purposes, including servo and robotics.
In contrast, a planetary gear set can have varying enter velocity. This can impact the frequency response of the gearset. A mathematical model of the two-stage planetary gears has non-stationary results and correlates with experimental results. Fig. 6.3 demonstrates an addendum. The dedendum’s least price is around 1.25m. When the dedendum is at its smallest, the dedendum has less inertia.
planetarygearbox

Offers increased dependability

The Planetary Gearbox is a better alternative for driving a automobile than a regular spur gearbox. A planetary gearbox is significantly less costly, and they have much better backlash, larger load ability, and increased shock masses. In contrast to spur gearboxes, nonetheless, mechanical sounds is practically nonexistent. This tends to make them a lot more trustworthy in high-shock circumstances, as effectively as in a wide range of apps.
The Economy Collection has the very same energy density and torque ability of the Precision Helical Sequence, but it lacks the precision of the latter. In distinction, Financial system Series planetary gearboxes function straight spur planetary gearing, and they are utilised in programs necessitating large torque. Equally varieties of gearboxes are suitable with NEMA servo motors. If torque density is critical, a planetary gearbox is the best option.
The Dispersion of External Load: The SSI model has been extensively used to model the reliability of planetary gear systems. This product takes the contact power and fatigue toughness of the program as generalized tension and power. It also provides a theoretical framework to assess the trustworthiness of planetary gear systems. It also has several other positive aspects that make it the chosen option for large-pressure programs. The Planetary Gearbox gives higher trustworthiness and performance than traditional rack and pinion equipment techniques.
Planetary gearing has higher trustworthiness and compact style. Its compact design and style permits for broader apps with issues about space and fat. In addition, the increased torque and reduction can make planetary gearboxes an superb option for a extensive selection of programs. There are a few significant kinds of planetary gearboxes, every single with its very own benefits. This post describes a few of them. When you recognize their workings, you will be in a position to decide on the greatest planetary gearbox for your requirements.

Has larger running speeds

When you search at planetary gearboxes, you might be baffled about which one particular to pick. The major problem is the application of the gearbox. You have to also choose on secondary factors like sounds amount, corrosion resistance, design, price, and availability around the world. Some constructors work quicker than other individuals and supply the gearboxes on the very same day. However, the latter ones frequently deliver the planetary gearbox out of inventory.
In contrast to standard gearboxes, a planetary gearbox can operate at larger speeds when the input pace fluctuates. However, these gears are not quite efficient in higher-velocity apps since of their enhanced noise amounts. This makes planetary gears unsuitable for programs involving a wonderful deal of sound. That is why most planetary gears are utilized in little-scale applications. There are some exceptions, but in standard, a planetary gearbox is greater suited for purposes with greater running speeds.
The standard planetary gearbox is a compact substitute to regular pinion-and-equipment reducers. They can be utilised in a vast variety of apps exactly where area and bodyweight are worries. Its performance is also increased, offering ninety seven% of the electricity input. It will come in a few distinct types dependent on the performance. A planetary gearbox can also be classified as a worm gear, a spur equipment, or a sprocket.
A planetary gearhead has a substantial-precision design and can create considerable torque for their size. It also decreases backlash to two arc-min. Furthermore, it is lubricated for existence, which indicates no servicing is required. It can suit into a little device envelope and has a little footprint. Moreover, the helical topped gearing offers quick positioning. A sealed gearbox stops abrasive dust from obtaining into the planetary gearhead.
planetarygearbox

Has downsides

The design and style of a planetary gearbox is compact and enables large torque and load capacity in a little place. This gear arrangement also minimizes the chance of put on and tear. World gears are arranged in a planetary fashion, enabling gears to shift below load and a uniform distribution of torque. However, some drawbacks of planetary gears have to be regarded as prior to investing in this gearbox.
Even though the planetary gearbox is a higher precision movement-management system, its design and style and servicing requirements are a worry. The bearing load is higher, necessitating regular lubrication. Also, they are inaccessible. Regardless of these downsides, planetary gearboxes are suitable for a variety of jobs. They also have minimal backlash and higher torsional stiffness, creating them excellent alternatives for a lot of applications.
As a end result, the speed of a planetary gearbox differs with load and speed. At lower ratios, the solar gear turns into too big in relation to the planet gears. As the ratio raises, the solar equipment will become as well low, lowering torque. The planetary gears also decrease their torque in higher-pace environments. As a result, the ratio is a essential thought for planetary gearbox condition monitoring.
Surplus drag may possibly consequence from out-of-tolerance elements or excessive lubrication. Drag ought to be calculated each in directions and be inside of satisfactory ranges. Grease and oil lubrication are two common planetary gearbox lubricants, but the option is mostly dependent on your application. Whilst grease lubricates planetary gears effectively, oil wants upkeep and re-lubrication each couple of thousand hours.

China Standard 22mm High Torque 12V 24V DC Motor with Miniature Planetary Gearbox near me factory